References

    News

      SEEIF CERAMIC

      SEEIF CERAMIC
      Renovation
      RÁJEC-JESTŘEBÍ, CZE
      Production hall
      Industrial lighting
      Annual energy savings 77,214 kWh
      76 %

      Original installation

      Original installation ARGIA lighting solution
      Type of luminary Mercury discharge lamps 250 W LEDIKO INLEN2 M2 DALI, INDUSTRY LINE AL
      Number of luminaires 70 pcs 52 pcs
      Total Input 20.29 kW 6.05 kW
      Consumption kWh/year 101,430 kWh 24,216 kWh
      Project resultCustomer’s total operating costs reduced by 76% thanks to the combination of LED luminaires and DALI control via daylight and motion sensors when increased illumination level by 40%.
      Return on investment 2.5 years

      ARGIA lighting solution

      Type of luminary

      LEDIKO INLEN2 M2 DALI, INDUSTRY LINE AL

      Number of luminaires 52 ks
      Total Input6.05 kW
      Consumption kWh/year 24216 kWh
      Project resultCustomer’s total operating costs reduced by 76% thanks to the combination of LED luminaires and DALI control via daylight and motion sensors when increased illumination level by 40%.
      Return on investment 2.5 years
      Reference sheet

      Installation parameters:

      • Higher temperature in furnace area
      • Increasing the illumination level by 40%
      • Workplaces of presses illuminated by separate LED luminaires
      • DALI control via daylight and motion sensors
      • Different lighting intensity according to the activity being performed
      • Full 5-year warranty with "piece-by-piece"

      For SEEIF Ceramic a.s., the manufacturer of ceramic components for the construction industry, we have replaced in full operation and without its interruption existing non-conforming discharge lluminaires for new modern DALI LED luminaires. There are furnaces for burning ceramic products, which place higher demands on the temperature resistance of the luminaires. The workplaces of the presses were illuminated by individualy switched luminaires. DALI control allows to set different levels of illumination for each activity. The use of energy saving and temperature resistant LED luminaires combined with DALI control with daylight and motion sensors give a superior 76% operating cost savings to the customer with a 40% increase of illumination.

      55 / 130
      130
      Services
      Industry
      References filter